How to Use Water Fed Pole Window Washing ?

There are a few sorts of Pure Water Window Cleaning Systems … furthermore, to see how they work, you have to remind yourself firstly…What is window cleaning?

Behind the Process of Traditional Window Cleaning

Stage 1: Agitate the earth on the glass into an arrangement in water with the applicator.

Stage 2: Remove the water totally with the Squeegee.

The utilization of cleanser is generally just to help step 2 as a surfactant to help the squeegee float over the glass surface and evacuate the (filthy) water.

The most vital ‘cut’ is to get the grimy water off the best edge, at that point the sides.

Behind the Process of Pure Water Window Cleaning

Stage 1: Agitate the soil on the glass with the Brush on the Pole into an arrangement.

Stage 2: Remove the (grimy) water by washing all of it off the glass with Pure Water.

This leaves the glass clean, however wet. In the event that the water is pure, the water will dry spot and streak free

On the off chance that the water isn’t pure, the water will dry leaving marks equivalent to the measure of TDS in the water used to do the wash.

So .. the Brush Bristles are the applicator, and the pencil jets are the Squeegee.

The most essential flush is to deliberately clean the best edge and to wash the whole distance side to side.

At that point, pursue the grimy water off the glass with brisk, close runs level over the glass. Guide the window in your brain and pursue the procedure. Compromising leaves marks.

The water in New Zealand is so pure that it is perfect all year round. For example window cleaning Nelson employs this method of window washing.

Watch out for streaks!

In the event that you contact an implement on the glass after the squeegee, you will leave an imprint.

In the event that you contact a brush on the glass after the wash, you will leave an imprint.

On the off chance that you miss some messy water with your squeegee, it will dry and leave an imprint or line.

On the off chance that you miss some grimy water with your wash procedure, it will leave an imprint or streak.

Careful when rinsing

The Operator can’t differentiate among messy and unadulterated water – they appear to be identical.

On the off chance that there are spots left in the best corners.

The Operator did not appropriately wash the best edge to the corners, leaving messy water in the corners.

On the off chance that there are spots along the base of the window.